Philips FWC380 - Manual (Page 25)

CONTROLS OPERATING THE SYSTEM
PROGRAM
for CD........... to program disc
tracks.
forTUNER ...to program preset
radio stations.
for CLOCK ..to select 12 or 24
hour in clock setting
mode.
DIM
to select different brightness for
the display screen : DIM 1, DIM 2,
DIM 3 or DIM OFF.
TAPE DECK 2
TAPE DECK 1
REPEAT
to repeat a disc track, a disc, or all
available discs.
SLEEP
to switch the system to standby
mode at a selected time.
SHUFFLE
to play all the available discs and
their tracks in random order
(!)
to switch the system to standby
mode.
Notes for remote control:
- First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. CD orTUNER).
- Then select the desired function
(►, !◄, ►!, etc.).
STANOBY-ON
MINI H/fl SrSTEM
i b‘ b b* d b
►► '..'i ►fi ►i
RECORC
- q :
: lock * time
'<>RTmAt SOUND MIX
1‘" II 1 ' ■" ' — II
3 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DUBBING AREPLAY DIM MODE PROGRAM
□ ( T j n 1 1 1 _ _ _ _ _ _ _ _ _ _ _ 1
SOUND NAVIGATION - JOG
Important:
Before you operate the system,
complete the preparation
procedures.
Plug and Play
The system provides PLUG and PLAY
feature that allows you to store all
available radio stations automatically
upon power up.
If the PLUG and PLAY has not
been installed
1 Upon power up, “Ru ID J.M5TRLL
' will be displayed.
Press PLAY (on the system only) to
start installation.
“IMS fRLL” will be displayed and
followed by “ I uMFR” and then
i i Q t i r n i i
nu I u .
-»The PROGRAM starts flashing.
-» PLUG and PLAY will start
searching for all radio stations on
FM band and then followed by
radio stations on AM band.
-»All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
^The last preset radio station will
appear on the display when PLUG
and PLAY is completed.