Philips FWC380 - Manual (Page 33)

IVUIO /Uf
rtílllULtí
LUflirUI.' 1
I I nrs\A/Or I
CD
Warning!
1) This system is designed for
conventional discs. Do not use
any accessories such as disc
stabilizer rings or disc treatment
sheets, etc., which may damage
the disc mechanism.
2) Do not load more than one disc
into each tray.
3) When the CD changer is loaded
with discs, do not turn over or
shake the system. This may jam
You may load three discs in the
CD changer for continuous
playback without interruption.
Discs for playback
This system can play all digital audio
disc, finalized digital audio CD-
Recordable and finalized digital audio
CD-Rewritable format discs.
nCOMPACT nCOMPACT nCOMPACT
ɧ(@ MSi
DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO
iReWritablel
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN*CLOSE.
->The CD changer tray slides out.
3 Load a disc with the printed side up
in the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC CHANGE button
^The CD changer tray will rotate
until the empty tray is ready for
loading.
4 Press OPEN'CLOSE to close the
CD changer tray.
^The total number of traciss and
the playing time of the selected
disc appear on the display.
Note;
- To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
Disc Direct Play
• You can play a disc directly by
pressing the DISC 1, DISC 2 or
DISC 3 button.The CD player will
stop at the end of playback of the
selected disc.
A lit button indicates that a disc is
loaded in the disc tray.
A flashing button indicates that a
disc is playing.
Playing a Disc
1 Press PLAY ►II to start playback.
“>The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, press
PAUSE ►!!
-♦The playing time flashes.
• To resume playback, press
PLAY ► II again.
2 To stop playback, press ■.
Note:
- All the available discs will play once,
then stop.