Philips AZ2605 - Manual (Page 8)

CD PLAYER
CD DISPLAY INDICATION
CD OPEN: When the CD door is open.
Total track number and playing time: In stop position.
Current track number and elapsed playing time: During CD play.
- In PAUSE position, the display freezes and the elapsed playing time
and the current track number are shown.
SHUFFLE/REPEAT: When the respective mode is activated.
PROGRAM: When program function is active,
no SEL: PROGRAM button is pressed but no tracks are selected,
prog: When you store a track.
PROGRAM FULL Maximum track number stored,
no prog: When PROGRAM is stopped/erased.
no diSC: Error in CD operation or with the CD (see
■TROUBLESHOOTING').
PAUSE PROGRAM SHUFRE
I-—j j REPEAT lAa
UUo oo o
LI LI
U LfU U
PLAYING A CD
/. Set the source selector® to CD.
2. Press OPEN ® to open the CD door.
3. Insert the AUDIO CD, printed side facing up. To close the CD door,
push the door down.
4 . Start playback by pressing PLAY»PAUSE HI®.
5. Adjust the sound using the VOLUME A ▼ @, TONE ® and DBB @
controls.
6. To interrupt playback, press PLAY» PAUSE HI®. Press
PLAY»PAUSE HI® again to continue playback.
7. Press STOP ■ ® to stop CD playback.
S. Set the source selector ® to TAPE/OFF position to switch off the set.
Note: CD playback will also stop when:
- the CD has reached the end;
- the CD door is opened;
- the source selector ® is in the TAPE/OFF position.
SEARCH K4 or^H
Selecting a different track during playback
- You can jump to the next track by pressing SEARCH ►» ® once. If you
want to skip more than one track, press SEARCH ® more than once
until the display shows the desired track number.
- If you want to repeat the running track from the beginning, press SEARCH
® once. If you want to repeat one of the previous tracks, press SEARCH w»
® more than once until the display shows the required track number.
Starting with a particular track
7, In the STOP position you can select a desired track using the SEARCH
M»® or>+r©.
2. Press PLAY» PAUSE HI® to start playback.