Cassehe recorder, Cassehe playback, Continuous playback – Philips AZ2605 User Manual
Page 10: Cassehe recording, General information on cassette recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CASSEHE RECORDER
m
a
ca
CASSEHE PLAYBACK
1.
Set the source selector® to TAPE/OFF.
2.
Press ST0P»0PEN ■ 4 ®/® to open the cassette holder.
3.
Insert a recorded cassette.
4.
Press PLAY ► ®/® and playback will start.
5. Adjust the sound using the VOLUME
AT
TONE ® and DBB @
controls.
6.
For brief interruptions, press PAUSE II ®/®. Press PAUSE II®/@
again to resume playback.
7. By pressing •« or ►► ®/®, fast winding of the tape is possible in
both directions.
8.
To stop playback, press STOP* OPEN ■
a
®/®.
- The keys are automatically released at the end of the tape.
9.
Set the source selector ® to TAPE/OFF position (with the cassette
keys released) to switch off the set.
Continuous playback
1.
Set the source selector ® to TAPE/OFF.
2.
Press both ST0P»0PEN ■ A ®/® keys to open the cassette holders.
3.
Insert a recorded cassette in both cassette holders.
4.
Press PLAY ► ® on deck 1 and playback will start on deck 1.
5.
Press PAUSE II® on deck 2 and then PLAY ► ®. As soon as playback
on deck 1 stops (when the tape has reached its end or STOP «OPEN ■
A
® is pressed) PAUSE II ® on deck 2 is released and playback will
start on deck 2.
CASSEHE RECORDING
General information on cassette recording
- Recording is permissible insofar as copyright or other rights of third
parties are not infringed.
- Recording is only possible on deck 1. During recording it is advisable
not to wind or rewind a tape in deck 2.
- This deck is not suited for recording on CHROME (lEC n) or METAL (lEC
IV) type cassettes. For recording you should use NORMAL type
cassettes (lEC I) on which the tabs have not been broken.
- The recording level is set automatically. Altering the VOLUME, DBB or
TONE controls will not affect the recording in progress.
- No recording will take place during the first 7 seconds, when the leader
tape passes the recorder heads.
- To prevent the accidental erasure of a recording, keep the cassette side
to be safeguarded in front of you and break out the left tab. Recording
on this side is no longer possible. To render this safeguard ineffective,
cover the tabs with a piece of adhesive tape.
10