Compaq XL118-XL127 - Manual (Page 83)

P RESARIO N OTEBOOK M AINTENANCE AND S ERVICE G UIDE 1200XL S ERIES R EMOVAL S EQUENCE 3
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
Service Considerations
Listed below are some of the considerations to consider during the disassembly and
assembly of the Notebook.
Tool and Software Requirements
The following items are required to service the computer:
•
Compaq screwdriver kit (Spare Part No. 161946-001)
•
Torx T-9 screwdriver
•
3/16-in. and 5mm nut drivers (for screwlocks and standoffs)
•
Small, standard screwdriver
•
Small, Phillips screwdriver
•
Diagnostics software
Screws
The screws used in the Notebook are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends that
all screws removed during disassembly be kept with the part that was removed, and then
returned to their proper locations.
Important: As each subassembly is removed from the Notebook, place it away from the
work area to prevent damage.