Interlogix GE-DSH-73 Series Installation Sheet - Manual (Page 10)

192.168.0.100 and the default telnet port number is 23. Then press the
OK button.
Figure 10: The Connect to dialog window
Log on to the Console
Make sure the device has finished booting. Once the telnet has connected to
the device, the hyper terminal will display the login request.
Then, the following message asks the login user name and password. The
factory default password and the login screen are as follows:
User name: admin
Password: admin
10 of 13 P/N 1069666-EN • REV 1.01 • ISS 14JUL10