Interlogix ES3001-4P-4T - Manual (Page 7)

IFS ES3001-4P-4T User Manual
7
2. Hardware description
This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same switch and automatically
distinguishes the speed of incoming connection.
This section describes the hardware features of ES3001-4P-4T. For easier management and control of the Switch, familiarize
yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before
connecting any network device to the ES3001-4P-4T, please read this chapter carefully.
In the following section, the term “Switch” means the Switch device, ie. ES3001-4P-4T; term of “switch” can be any third
switches.
2.1 Front Panel
The Front Panel of the ES3001-4P-4T PoE Ethernet Switch consists of 8x Auto-Sensing 10/100/1000Mbps Ethernet RJ-45
Ports. The LED Indicators are also located on the front panel of the ES3001-4P-4T.
Figure 2-1: ES3001-4P-4T Switch Front Panel
2.1.1 LED Indicators
 System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
FAN Alert Orange Lights to indicate that the FAN failure.
 Per 10/100/1000Mbps Port
LED Color Function
PoE In-use Orange Lights to indicate the port is providing 48V DC in-line power. (1-4 ports)
Speed Green
Lit: indicate the Switch is successfully connecting to the network at 1000Mbps.
Off: indicate that the Switch is successfully connecting to the network at 10Mbps or
100Mbps.
LNK/ACT Green Lit: indicate the link through that port is successfully established.
Blinks to indicate that the Switch is actively sending or receiving data over that port.