Interlogix MC355-1T/1S User Manual - Manual (Page 23)

IFS MC355-1T/1S User Manual 19
The IP Configuration Web page screen includes the following configurable data:
DHCP Client Disable or enable the DHCP Client function of the MC355-1T/1S, the factory
default mode is Disable.
IP Address Assigns a new IP address for the MC355-1T/1S, the factory default IP address
is 192.168.0.100.
Subnet Mask Assigns a new subnet mask for the MC355-1T/1S, the factory default subnet
mask is 255.255.255.0.
Gateway Assigns a new gateway for the MC355-1T/1S, the factory default gateway is
192.168.0.254.
Description Input a new description for the MC355-1T/1S, up to a maximum of 32
characters allowed.
Apply Button Press “Apply” button for save current configuration of the MC355-1T/1S.
Note: If you forget the IP subnet address after changing the default value, press
the "Reset" button located at the front panel of MC355-1T/1S for 10 seconds to
restore the device to the factory settings.
Password Setting
This function helps the administrator to login securely to the Web admin page.
Figures 11 & 12 illustrate the Password Setting screen of the MC355-1T/1S.
Figure 11: Password Setting Web page screen