Interlogix MC355-1T/1S User Manual - Manual (Page 18)

14 IFS MC355-1T/1S User Manual
Login to the MC355-1T/1S
The following shows how to startup the Web Management of the MC355-1T/1S.
Please note that the device needs to be configured through an Ethernet
connection and make sure that the administrator PC is set on the same IP subnet
address.
For example, the default IP address of the MC355-1T/1S is 192.168.0.100 (the
factory-default IP address), then the administrator PC should be set at
192.168.0.x (where x is a number between 1 and 254, except 100), and the
default subnet mask should be 255.255.255.0.
Enter the default IP address of http://192.168.0.100 in the address bar of the web
browser.
After entering the username and password (default user name and password is
“admin”) in login screen the Web main screen will appear.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Figure 7: Login Web Page screen
Note: For security reasons, please change and keep a record of the new
password after this first setup.
Only lowercase entries are accepted under web interface.