Interlogix MC350-1T-2S - Manual (Page 5)

5
1.3 Product Features
Physical Port
„ 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
„ 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
Layer 2 Features
„ IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
„ Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
„ Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control
(Full-Duplex)
„ 9K Jumbo Frame Size support
„ Automatic address learning and address aging
Industrial Case / Installation
„ Slim type IP30 metal case / protection
„ DIN Rail and Wall Mount Design
„ Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable
„ Supports EFT protection for 6000 VDC for power line
„ Supports 6000 VDC Ethernet ESD protection
„ -40 to 75 degrees C operating temperature
Fiber Port Redundancy
„ Once enable fiber redundant function, port 1 will be “Primary Port” and port 2 will be “Backup Port”.
„ Link status auto-detect and redundant on Dual ports with same connector type
„ Only when Primary-Port is active, the Backup-Port is blocked
„ When Primary-Port link fails, the traffic will swap to Backup-Port automatically
„ Once the Primary-Port status is back to link up, the traffic will swap from Backup-Port to Primary-Port