Intek RheoVac DR - Manual (Page 34)

I:\OFFICE\WPMANUAL\RV DR Appendix B.wpd August 1, 2004
-B5-
4. Networking with the
RheoVac DR: If all of the items above are completed successfully, the
UIC or LAN computer should be able to network with the
RheoVac DR. To search for the
RheoVac 950 from the UIC or LAN computer:
•
Open My Computer
• Each
RheoVac instrument is identified by a unique network ID. The ID is an “R” plus
the first five digits of the serial number found on the unit.
• Look for the Network ID of your
RheoVac DR. If the expected Network ID (See
previous paragraph) does not show up in the list, then type in the appropriate Address
line (\\“R” plus the first five digits of the serial number) and click the ‘Go’ button. This
may take several seconds and then a RHEOVAC folder will appear, which is the hard
drive of the
RheoVac DR.
• Open the
RHEOVAC folder then open the DATA folder. The \\Network ID
\RHEOVAC\DATA folder contains all the stored data. Use Windows copy/paste (COPY
- Ctrl C; PASTE- Ctrl V) to save the data files to the UIC or LAN computer.