ILY FORTRESS CD/DVD Duplicator System User Manual

Page 9

3. Eject disc tray(s) of the Writer Drives and place copied disc(s) to be compared on the tray(s).

Number of drives used depends on number of copies to be compared. It is not necessary to always

use all drives.

4. Use the scroll buttons to select the command “6. Compare” and press the ENT button. The drives

will automatically close trays and begin the compare process.

5. Once the compare process is complete, the trays will eject the discs that have passed the compare

process.

Î Press

ENT to

load discs

О Analyzing source

disc

О Start

comparison

О Finish
and eject

disc

Set Burn Speed – This feature allows you to set the burn speed of various types of disc: general CDs
(data and VCDs), audio CDs, DVDs and dual-layer DVDs (DVD DL).

Selectable burn speeds:
CD: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40 (default), 44, 48, 52, 56 MAX.
Audio CD: 1, 2, 4, 8, 10, 12, 16, 20, 24 (default), 32, 36, 40, 44, 48, 52, 56 MAX.
DVD: 1, 2, 2.4, 4, 6, 8 (default), 12, 16, 18, 20 MAX.
DVD DL: 1.2 (default), 2.4, 4, 6, 8, 12, 16, 18, 20 MAX.

To Set the Burn Speed:

1. Power on the duplicator (if not already on)
2. Use the Scroll buttons to select “7. Set Burn Speed”. Press the ENT button.
3. The first speed selection is for general CDs. Use the Scroll buttons to select the desired burn speed

and press the ENT button.

4. The second speed selection is for audio CDs. Use the Scroll buttons to select the desired burn speed

and press the ENT button.

5. The third speed selection is for DVDs. Use the Scroll buttons to select the desired burn speed and

press the ENT button.

Note: The selection is only available on DVD duplicators.

6. The last speed selection is for DVD DL. Use the Scroll buttons to select the desired burn speed and

press the ENT button.

Note: The selection is only available on DVD duplicators.

Select Source – This command will allow you to change the source drive to any one of the drive(s)
inside the unit, including the HDD (if installed).

To change the source drive inside the unit to a different drive:

Î Press

ENT &

i or j О

О i or j and press

ENT to set

general data CD burning speed

О i or j and press

ENT to set audio CD burning speed О

i or j and press ENT to

set DVD burning speed

О Finish and return

to main menu

1. Power on the duplicator (if not already on).

2. Use the Scroll buttons to select the “8. Select Source: Press the ENT button.