ILY FORTRESS CD/DVD Duplicator System - Manual (Page 4)

Menu Overview:
1
Below is a quick reference chart of the functions available on all models of Spartan Fortress CD/DVD Duplicators.
After the drives are successfully installed, user may access the menu functions by powering on the system.
1 COPY Copies the master CD/DVD. All contents of the master disc will be duplicated
on to all target disc(s) simultaneously.
2
TEST Simulates the copy process, but no data is recorded onto the blank disc(s).
Note: Test mode can only be done with DVD-R and CD-R media only.
3 COPY & VERIFY Copies the master CD/DVD, and then verifies the presence of data on the
copied disc(s) to ensure readability of the copied disc(s).
4 COPY & COMPARE Copies the master CD/DVD, and then immediately follows the copy process
with a bit-for-bit comparison between the master disc and copied disc(s) to
ensure exact duplication.
Note: The “Compare” function cannot be used with audio CDs.
5 VERIFY Verifies the presence of data on the copied disc(s) to ensure that the copied
disc(s) can be read back.
6 COMPARE Performs a bit-for-bit comparison between the master disc and copied disc(s).
7 SET BURN SPEED Allows the speed settings to be changed for various formats.
8 SELECT SOURCE Allows the source drive to be changed to any of the available drives in the
duplicator, including the Hard Disk Drive (HDD).
TRACK EDIT Allows for the selection of individual track(s) from different master audio CDs to
create custom compilation.
9.1 Copy Track Allows the selection of individual track(s) from the master CD and copies the
selected track(s) onto all target discs.
9.2. Close Disc Closes the target discs when all of the track(s) are burned on to all target discs.
Note: The copied disc(s) will NOT play back without this step. Do NOT skip this
step.
9
9.3 Disc Info Displays the information regarding the track(s) on the disc(s) and how much
space is remaining on the target disc(s).
UTILITY
10.1 Pre-scan Performs a scan on the master disc before the copy process starts and ensures
the master disc can be copied in the duplicator.
10.2 Quick Erase Erases all rewritable media (CD-RW and DVD+/-RW, DVD+/-RW DL).
10.3 Full Erase Formats all rewritable media (CD-RW and DVD+/-RW, DVD+/-RW DL).
10.4 Eject All Disc Ejects all disc trays, including source drive.
10.5 Disc Info. Displays basic information of the discs inserted, such as disc type, amount of
data on disc for master disc(s) (in MB) and media book type. For blank media,
displays the media book type, available space and speed of the media.
10.6 Drive Info. Displays information of all drives in the duplicator including the Reader, HDD (if
present) and Writer drive(s).
10
10.7 System Info. Displays the duplicator controller information, such as the hardware version,
buffer memory and currently loaded firmware.
2