Char-Broil 463271309 - Manual (Page 18)

8a
11
10
18
#10-24x3/8” screw
Sideburner lid
Place sideburner lid onto left shelf and align holes in back of lid with hinge holes. Secure lid to hinges using four #10-24x3/8”
screws, 5mm flat washers, 5mm lock washers, and #10-24 hex nuts.
NOTE: Fully secure one hinge
with screws, washers and nuts,
then secure remaining hinge.
Handle appearance may differ from actual part.
#10-24 hex nut
5mm lock
washer
5mm flat
washer
Insert sideburner burner into left shelf.
shelf, shown A.
sideburner burner
Wing nut
electrode
ignitor wire
valve
sideburner drip pan
sideburner drip pan
burner tube
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
Secure burner to sideburner drip pan with one Wing nut, shown B.
Make sure burner tube
Under sideburner shelf, attach
sideburner ignitor wire to electrode.
engages sideburner valve, shown C.
A
B
C