IC Realtime 1.3 Megapixel 720P HD-AVS IR PTZ Dome Camera - Manual (Page 21)


HUE : It is to set picture hue. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.

BRIGHTNESS: It is to set picture brightness. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.



SATURATION: It is to set picture saturation. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.



CHROMA SUPPRESS: It is to set picture color control. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.



GAMMA: It is to set picture gamma. It includes the fourth menu. Move the cursor to current item an
then click confirm button to go to the submenu.



CONTRAST: It is to set picture color contrast. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.



STYLE: It is to set video style. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
 

BACK: Go back to previous menu.



EXIT: Log out system menu.


3.4.4 Function Setting
PRIVACY MASK PTZ AUTO STOP ：15S
PRESET
PTZ SPEED ：2 HEATER CONTROL
AUTO PAN
SET ZERO BACK EXIT
AUTO SCAN
POWER UP
AUTO TOUR
MENU PASSWORD
PATTERN
MENU IDLE ：1M
IDLE MOTION
NEXT PAGE
NEXT PAGE
BACK EXIT
BACK EXIT
Figure 3-18 Function setting Figure 3-19 Next page Figure 3-20 Next page
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You
can see the above interface.

PRESET: It is to set preset. Move the cursor to PRESET and then click confirm button to go to the
third submenu.



AUTO PAN: It is to set pan. Move the cursor to AUTO PAN and then click confirm button to go to the
third submenu.



AUTO SCAN: It is to set scan number, speed and etc. Move the cursor to AUTO SCAN and then
click confirm button to go to the third submenu.



AUTO TOUR: It is to set tour number, tour operation and etc. Move the cursor to AUTO TOUR and
then click confirm button to go to the third submenu.



PATTERN: It is to set pattern number and etc. Move the cursor to AUTO PATTERN and then click
confirm button to go to the third submenu.



IDLE MOTION: It is to set idle operation, idle time and etc. Move the cursor to IDLE MOTION and
then click confirm button to go to the third submenu.



NEXT PAGE: It includes: PRIVACY MASK, PTZ SPEED, SET ZERO, POWER UP and etc. Move the
cursor to the item and then click the confirm button to set.

14