beautypg.com

Changing a flat tire – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 299

background image

Changing a Flat Tire

13. Locate the jacking point nearest

the tire you need to change. It is
pointed to by a mark molded
into the underside of the body.

Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make

sure the jacking point tab is

resting in the jack notch.

14. Use the extension and wheel

wrench as shown to raise the
vehicle until the flat tire is off the
ground.

15. Remove the wheel nuts and flat

tire. Temporarily place the flat tire

on the ground with the outside
surface of the wheel facing up.

You could scratch the wheel if you

put it face down.

Taking Care of the Unexpected

JACKING POINT

EXTENSION

WHEEL

WRENCH

Main Menu

Table of Contents