beautypg.com

Cooling system – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 249

background image

Cooling System

4. Install a rubber hose on the drain

bolt in the back of the engine
block. Loosen the drain bolt.

5. Remove the reserve tank from its

holder by pulling it straight up.

Drain the coolant, then put the

tank back in its holder.

6. When the coolant stops draining,

tighten the drain plug at the
bottom of the radiator.

7. Tighten the drain bolt at the rear

of the engine cylinder block
securely.

Tightening torque:

7 lbf.ft (10 N.m,1.0 kgf.m)

8. Mix the recommended antifreeze

with an equal amount of purified

or distilled water in a clean
container. The cooling system

capacity is:

1.74 US gal (6.6 l,1.45 Imp gal)

Maintenance

RESERVE TANK

RESERVE

TANK CAP

HOLDER

Main Menu

Table of Contents