beautypg.com

Cooling system – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 247

background image

Cooling System

1. Make sure the engine and radiator

are cool.

2. Turn the radiator cap counter-

clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.

3. Remove the radiator cap by

pushing down and turning
counterclockwise.

4. The coolant level should be up to

the base of the filler neck. Add
coolant if it is low.

5. Put the radiator cap back on.

Tighten it fully.

6. Pour coolant into the reserve tank.

Fill it to halfway between the MAX

and MIN marks. Put the cap back
on the reserve tank.

Do not add any rust inhibitors or
other additives to your vehicle's
cooling system. They may not be

compatible with the coolant or
engine components.

Maintenance

RADIATOR CAP

RESERVE TANK

Main Menu

Table of Contents