beautypg.com

Lights – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 280

background image

Lights

6. Put the socket back into the light

assembly and turn it clockwise to
lock it in place.

7. Test the light to make sure the

new bulb is working.

8. Put the light assembly back into

the tailgate. Install the screw and
tighten it securely. Reinstall the
lens piece.

Replacing a Rear License Bulb

1. Remove the license light assembly

by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out.

2. Remove the lens from the bulb

holder by pulling the lens while
squeezing the tabs on both sides
of the holder.

3. Pull the bulb straight out of its

socket. Push the new bulb in until

it bottoms in the socket.

CONTINUED

Maintenance

Main Menu

Table of Contents