beautypg.com

Spark plugs – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 258

background image

Spark Plugs

3. Disconnect the wire connector

from the ignition coil by pushing

on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.

4. Use a wrench to remove the

hexagon socket head cap bolt
holding the ignition coil. Remove
the ignition coil by pulling it

straight out.

5. Remove the spark plug with

a five-eighths inch (16 mm) spark
plug socket.

6. Put the new spark plug into the

socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it.

CONTINUED

Maintenance

HEXAGON SOCKET HEAD CAP BOLT

Main Menu

Table of Contents