beautypg.com

Spark plugs – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 259

background image

Spark Plugs

7. Torque the spark plug. (If you do

not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:

13 lbf.ft (18 N.m,1.8 kgf.m)

Tighten the spark plugs carefully. A

spark plug that is too loose can
overheat and damage the engine.

Overtightening can cause damage to

the threads in the cylinder head.

8. Install the ignition coil. Reinstall

the hexagon socket head cap bolt.

9. Push the wire connector onto the

ignition coil. Make sure it locks in
place.

10. Repeat this procedure for the

other five spark plugs.

11. Reinstall the cover on the front

cylinder bank while putting its
mounting clip in the hole on the
passenger's side. Secure the cover
by turning the heads of the two
holding clips one-quarter turn
clockwise with a flat-tipped
screwdriver.

Specifications:

NGK:
DENSO:

PZFR5F-11

PKJ16CR-L11

Spark Plug Gap:

0.04 in (1.1 mm)

Maintenance

NOTICE

Main Menu

Table of Contents