Fog light bulbs, Low beam headlights – HONDA 2015 Pilot - Owner's Manual User Manual
Page 404

Continued
403
uu
Replacing Light Bulbs
u
Fog Light Bulbs
*
Main
tenan
ce
1. Remove the clips using a flat-tip
screwdriver, then remove the upper part of
the air intake duct.
2 Engine Compartment Covers P. 391
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the headlight
assembly and turn it to the right.
5. Insert the coupler into the connector of the
bulb.
Fog Light Bulbs
*
When replacing, use the following bulbs.
1. Remove the clips using a flat-tip
screwdriver, and pull down the under
cover.
■
Low Beam Headlights
Bulb
Tab
Coupler
Driver's side
Driver and passenger side
Fog Light: 55 W (H11)
1
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Clip
* Not available on all models