HONDA 2015 Pilot - Owner's Manual - Manual (Page 322)

321
uu Compass * u Compass Zone Selection
Features
Compass Zone Selection
1. Turn the ignition switch to ON ( w .
2. Press and hold the SETUP button until the
display shows the compass setting menu
list.
3. Rotate to select Zone Adjust, then
press . The display shows the current
zone number.
4. Rotate to select the zone number of
your area (See Zone Map), then press .
1 Compass Zone Selection
The zone selection is done to compensate the variation
between magnetic north and true north.
If the calibration starts while the audio system is in
use, the display returns to normal after the calibration
is completed.
Zone Number
2
3
4
5
6 7 8 9
10 11
12
13
14
15
Zone Map
Guam Island: Zone 8
Puerto Rico: Zone11