Install the transmitter batteries – Heli-Max HMXE0809 User Manual
Page 8
8
®
INSTALL THE TRANSMITTER BATTERIES
INSTALL THE TRANSMITTER BATTERIES
❏
To open the battery compartment push inward and pull downward on the
battery cover. Carefully remove the battery holder and install eight AA batteries.
Double check the polarity of each battery and ensure that the battery holder is
connected to the transmitter. Place the battery holder into the transmitter and
slide the battery cover back into place.
❏
Turn on the transmitter and verify that the LCD initializes. Turn the transmitter
off for now. If the LCD did not initialize, remove the battery box from the
transmitter and verify that the batteries were installed correctly
See also other documents in the category Heli-Max Air equipment:
- HMXE0830 (20 pages)
- HMXE0834 (16 pages)
- HMXE0834 Maintenance Guide (4 pages)
- HMXE0836 (20 pages)
- HMXE0846 (20 pages)
- HMXE0824 (28 pages)
- HMXE7459 (4 pages)
- HMXE0838 (20 pages)
- HMXR4855 (1 page)
- HMXE7453 (2 pages)
- HMXR4854 (8 pages)
- HMXM1015 (15 pages)
- HMXM1015 (2 pages)
- HMXJ2025 (16 pages)
- HMXE0813 (16 pages)
- HMXE1008 (2 pages)
- HMXE0820 (24 pages)
- HMXE0815 (16 pages)
- HMXE0800 (20 pages)
- HMXE0801 (4 pages)
- HMXE06 (20 pages)
- HMXE0810 (36 pages)
- HMXE04 (2 pages)
- HMXE9584 (1 page)
- HMXE04 Addendum (2 pages)
- HMXE06 Addendum (2 pages)
- HMXE07 (24 pages)
- HMXE09 (12 pages)
- HMXE13 Manual (28 pages)
- HMXE13 Quick Start (2 pages)
- HMXE05 (12 pages)
- HMXE14 Manual (20 pages)
- HMXE14 Quick Start (2 pages)
- HMXM1012 (2 pages)
- HMXP2000 (1 page)
- HMXE4105 (1 page)
- HMXE0250 (44 pages)
- HMXM1010 (2 pages)
- HMXM1011 (2 pages)
- HMXE0200 (20 pages)
- HMXE0205 (20 pages)
- HMXE0210 (20 pages)
- HMXE0806 (40 pages)
- HMXE0806 Addendum (4 pages)
- HMXE0807 (32 pages)