Maintenance and repair – Heli-Max HMXE08 Manual User Manual
Page 20
20
MAINTENANCE AND REPAIR
MAINTENANCE AND REPAIR
The Heli-Max™ Novus UH-1D Huey CX is an extremely small helicopter.
Working on a model this size will require small tools. The DTXR0170 DuraTrax®
Precision Phillips Screwdriver 00x75mm is recommended. On occasion it will
be necessary to replace damaged parts after a crash. Please use this section
as a guide to performing these steps.
Main Rotor Blade Replacement
Remove the blade bolt using a #00 phillips screwdriver. After the blade bolt has
been removed, slide the rotor blade out of the blade grip. Reinstall the new blade,
ensuring that the holes within the blade and blade grip are aligned properly.
Reinstall the blade bolt.
See also other documents in the category Heli-Max Air equipment:
- HMXE0830 (20 pages)
- HMXE0834 (16 pages)
- HMXE0834 Maintenance Guide (4 pages)
- HMXE0836 (20 pages)
- HMXE0846 (20 pages)
- HMXE0824 (28 pages)
- HMXE7459 (4 pages)
- HMXE0838 (20 pages)
- HMXR4855 (1 page)
- HMXE7453 (2 pages)
- HMXR4854 (8 pages)
- HMXM1015 (15 pages)
- HMXM1015 (2 pages)
- HMXJ2025 (16 pages)
- HMXE0813 (16 pages)
- HMXE1008 (2 pages)
- HMXE0820 (24 pages)
- HMXE0815 (16 pages)
- HMXE0800 (20 pages)
- HMXE0801 (4 pages)
- HMXE06 (20 pages)
- HMXE0810 (36 pages)
- HMXE04 (2 pages)
- HMXE9584 (1 page)
- HMXE04 Addendum (2 pages)
- HMXE06 Addendum (2 pages)
- HMXE07 (24 pages)
- HMXE09 (12 pages)
- HMXE13 Manual (28 pages)
- HMXE13 Quick Start (2 pages)
- HMXE05 (12 pages)
- HMXE14 Manual (20 pages)
- HMXE14 Quick Start (2 pages)
- HMXM1012 (2 pages)
- HMXP2000 (1 page)
- HMXE4105 (1 page)
- HMXE0250 (44 pages)
- HMXM1010 (2 pages)
- HMXM1011 (2 pages)
- HMXE0200 (20 pages)
- HMXE0205 (20 pages)
- HMXE0210 (20 pages)
- HMXE0806 (40 pages)
- HMXE0806 Addendum (4 pages)
- HMXE0807 (32 pages)