Preflight – Heli-Max HMXE0804 User Manual
Page 12
12
Installing the Flight Battery
o
Slide the flight battery into the Novus CP Helicopter as shown.
PREFLIGHT
PREFLIGHT
Turning the Model On
o
The Novus CP Helicopter uses a 2.4GHz system that requires a binding
process when the unit is powered up. This process involves connecting the
flight battery to the ESC with the transmitter turned off. Ensure that the throttle
stick is at its
lowest position, and the idle up switch is off. Then turn the
transmitter on. You will notice that the transmitter indicator begins to flash,
indicating that the binding process is taking place.
Once the indicator quits flashing you should see the servos move, signifying
that the receiver is now bound to the transmitter. The helicopter must be left
still for 5 seconds so the gyro can perform the initialization process. The Novus
- HMXE0830 (20 pages)
- HMXE0834 (16 pages)
- HMXE0834 Maintenance Guide (4 pages)
- HMXE0836 (20 pages)
- HMXE0846 (20 pages)
- HMXE0824 (28 pages)
- HMXE7459 (4 pages)
- HMXE0838 (20 pages)
- HMXR4855 (1 page)
- HMXE7453 (2 pages)
- HMXR4854 (8 pages)
- HMXM1015 (15 pages)
- HMXM1015 (2 pages)
- HMXJ2025 (16 pages)
- HMXE0813 (16 pages)
- HMXE1008 (2 pages)
- HMXE0820 (24 pages)
- HMXE0815 (16 pages)
- HMXE0800 (20 pages)
- HMXE0801 (4 pages)
- HMXE06 (20 pages)
- HMXE0810 (36 pages)
- HMXE04 (2 pages)
- HMXE9584 (1 page)
- HMXE04 Addendum (2 pages)
- HMXE06 Addendum (2 pages)
- HMXE07 (24 pages)
- HMXE09 (12 pages)
- HMXE13 Manual (28 pages)
- HMXE13 Quick Start (2 pages)
- HMXE05 (12 pages)
- HMXE14 Manual (20 pages)
- HMXE14 Quick Start (2 pages)
- HMXM1012 (2 pages)
- HMXP2000 (1 page)
- HMXE4105 (1 page)
- HMXE0250 (44 pages)
- HMXM1010 (2 pages)
- HMXM1011 (2 pages)
- HMXE0200 (20 pages)
- HMXE0205 (20 pages)
- HMXE0210 (20 pages)
- HMXE0806 (40 pages)
- HMXE0806 Addendum (4 pages)
- HMXE0807 (32 pages)