Heli-Max HMXE14 Manual - Manual (Page 7)

7
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Install Batteries in the Transmitter
❏
Remove the battery
cover from the back of
the transmitter, remove
the battery box and install
eight (8) “AA” batteries into
the battery box. Double-
check the polarity of each
battery before placing the
battery box back into the
transmitter and replacing
the battery cover.
❏
Turn on the transmitter
using the power switch as
shown and verify that the
LED indicator glows solid
red. Turn the transmitter off
for now. If the LED indicator
did not light then remove the
battery box and verify that
the polarity of the batteries
is correct.
GET THE MODEL READY TO FLY GET THE MODEL READY TO FLY
Charging the Flight Battery
WARNING!! ALWAYS ensure that the charge indicator light is
green before connecting the fl ight battery to the charger.
ALWAYS unplug the battery from the charger when the charge
process is complete. If the battery is left connected, the charger will discharge
the battery, possibly damaging the battery or charger.