Haltech E6X Manual DOS Version - Manual (Page 24)

E6X Manual
24
E6X and then press the Enter Key.
You must now type:
E6X/A and then press the Enter Key.
The “/A” tells the program you have an Azerty keyboard. The program will adjust
accordingly.
2.3 Using the Software in Windows
The following explains how to use the programming software in a windows 95 or later
operating system, if you are running the software in MS-DOS, windows 3.x or if you have
any problems running the software in the windows environment, follow the instructions in 2.2
Using the Software with MS-DOS, p22
2.3.1 Installing the Software
To install the software in windows you can either; start the computer in MS-DOS mode and
follow the instructions for MS-DOS above or follow the instructions below.
Start the computer; when the desktop appears double click the “My Computer” Icon in the top
left of the screen (as shown below).