Great Planes Spitfire 25 GP/EP ARF - GPMA1478 - Manual (Page 19)

❏
2. Locate the six brushless motor mount adapter pieces.
Glue the back piece and the four side pieces together as
shown. The tabs on the pieces will all interlock together.
❏
3. Install four 3mm blind nuts into the motor mount adapter
front piece. Use a 3mm x 10mm screw and a 3mm flat washer
to draw them tight into the holes.
❏
4. Attach the motor mount adapter to the firewall using four
3mm x 16mm machine screws, four 3mm flat washers and
thread-locking compound.
❏
5. Install the brushless motor onto the aluminum motor
mount (included with the motor) using four 3mm x 8mm
machine screws (included with the motor) and thread-
locking compound. If you haven’t done so already, install the
prop adapter using the hardware included with the motor.
Glue the front adapter piece to the brushless motor mount
box as shown.
❏
6. Attach the aluminum motor mount to the brushless
motor mount box using four 3mm x 10mm machine screws,
four 3mm lock washers, four 3mm flat washers and thread-
locking compound.
❏
7. Cut a 1-1/2" [38mm] piece from the included 1/4"
[6mm] triangle stock. Glue the piece flush with the top edge
of the fuel tank opening as shown. This will provide a larger
mounting surface for the battery tray.
19