Great Planes P-51 Mustang Sport Fighter .46 EP ARF - GPMA1208 User Manual
Page 20
20
❏
6. Install the spinner and propeller onto the engine.
FINISH THE MODEL
Install a Pilot
❏
1. If you wish to install a pilot, cut away the bottom of the
canopy and install a pilot of your choice. Replace the portion
you cut from the bottom of the canopy using glue. We installed
the Great Planes 1/5 scale pilot (GPMQ9115).
Apply The Decals
❏
1. Apply the decals using these photos and the box photos
to determine the proper location.
GET THE MODEL READY TO FLY
EP VERSION
Install and Connect the Motor Battery
Before you can power the radio system and set up the controls,
the motor battery will need to be charged. Charge the battery
following the instructions with your battery and charger.
Check the Control Directions
❏
1. Turn on the transmitter and receiver and center the trims.
If necessary, remove the servo arms from the servos and
reposition them so they are centered. Reinstall the screws
that hold on the servo arms.
❏
2. With the transmitter and receiver still on, check all the
control surfaces to see if they are centered. If necessary, adjust
the clevises on the pushrods to center the control surfaces.