beautypg.com

Great Planes P-51 Mustang Sport Fighter .46 EP ARF - GPMA1208 User Manual

Page 15

background image

15

7. Install a 6" [152mm] servo extension on the ESC speed

control. Secure the connection with tape or heat shrink tubing.

8. Install one half of the provided Velcro

®

to the back of

the ESC and the other inside the fuselage. Cut the Velcro as
needed to fi t properly.

9. Install the ESC inside of the fuselage. Plug the motor

wires into the ESC and the servo lead into the receiver
following the instructions with the ESC.

10. Install your battery, securing it with the included Velcro

strap. Cut the Velcro to fi t your battery.

11. For proper cooling, with a sharp hobby knife remove

the covering from the pre-cut holes in the rear of the fuselage.

Note: This completes the motor installation. Move ahead to

page 18 to complete the assembly of the airplane.