Grant Instruments LTC4 - Manual (Page 5)

LTC4 31115 V1
Operating Manual Page 4
www.grantinstruments.com
1.0 Use of products
The following products are covered by this operating manual:

LTC4 & LTC4L
The products listed above low temperature circulators designed for indoor laboratory use
by a professional user.
The LTC4 consists of a TX150 immersion thermostat combined with an R4 refrigeration
unit, with insulated hoses and clips to allow circulation of temperature control fluids to
external equipment.
2.0 How to use this operating manual
This operating manual will allow you to unpack, set-up and operate the R unit correctly
and safely. Important safety information, symbols and warnings are listed below and
should be read carefully. Section 4 gives information about how to unpack and install the
product correctly. Section 5 gives provides operating information for the LTC4. Product
technical specifications and tips are provided in sections 6 and 7. The warranty for this
product is for THREE YEARS and is detailed in section 8 and should be registered by
completing the on-line registration form at www.grantinstruments.com.
If there is a technical matter that this operating manual does not address, or any other
question concerning this product, please contact Grant Instruments or your local
distributor, who will be able to provide any additional information.
3.0 Safety information
3.1
Safety compliance
The LTC4 meets the requirements of international safety standard IEC 61010: Safety
requirements for electrical equipment for measurement, control, and laboratory use.
3.2
Safety symbols
The symbols below are marked on the equipment and throughout this manual to indicate:
Caution: Surfaces and heat transfer liquid can be hot during and after use.
Read this manual before using the bath.
Important safety warning.