Globalstar SmartOne User Manual
Page 35
SmartOne Manual Rev 1.4 DOC# 9100-0268-01 p.35
Level of Sensitivity for Vibration Sensor. The vibration sensor has a
range of sensitivity from 1 to 31 (1 being most sensitive and 31 being
least sensitive). The smaller the sensitivity level, the more sensitive
the vibration sensor would be to movement.
Time to be in a State of Vibration. Time the vibration sensor must be
above the sensitivity level before being in a State of Vibration. If the
device senses continuous vibration for a period of time less than the
specified in this parameter, the device will ignore the vibration and
will not enter into a State of Vibration
Time to be in a State of Lacking Vibration. Time the vibration sensor
must be below the sensitivity level before in a State of Lacking
Vibration.
Outside Change of Location Area. The parameters in this section define
the functionality of the device while outside its Change of Location
Area.