Galaxy Audio POWERED MICRO SPOT - Manual (Page 9)

Page 8
POWERED HOT SPOT/POWERED MICRO SPOT
FEATURES OF GALAXY AUDIO'S POWERED SPEAKERS
•
PA5XD (CUL Listed), MSPA/MSPA-DC (CSA US listed)
•
Black cast aluminum faceplate (used as an integral heat sink)
•
Fire-retardant styrene plastic outer shell
•
SmartALIC (PA5XD only) input circuitry automatically
distinguishes between microphone and line level signals without
having to flip a switch.
Using the PA5XD as a...
Powered Monitor
When connected to a mixer’s monitor output or auxiliary output, the
PA5XD enables each performer to create his/her own monitor mix.
Additional monitors can be attached to the PA5XD’s speaker output.
A recorder can be attached to the PA5XD’s LINE output.
Virtually any type of signal (instrument, mic level from a mixing
console, guitar, keyboard, tape player or condenser mic can be
plugged into the
PA5XD inputs.
Ultra-Compact PA System
The PA5XD by itself is a one-piece PA system. Simply plug in a mic
or instrument for 100 watts of sound reinforcement power.
When two 16 ohm Galaxy Audio
HOT SPOT personal monitors are
attached to the SPEAKER OUTPUT, the PA5XD’s power output
increases to 146 watts. Whether using the HOT SPOT or another
speaker, the
PA5XD’s power output depends on the impedance of
the speakers being powered. The load on the PA5XD's amplifier
section must greater than or equal to 4 ohms. Anything less will
overload the amplifier.
Practice Amp
A balanced signal from a microphone or second instrument may be
fed into one input while an instrument, CD player or tape deck is fed
into the other.
®