Galaxy Audio DS-CP25 - Manual (Page 9)

Input Routing - the DS-CP25 Processor is equipped with 2 Analog Inputs (Balanced Female XLR) and a
stereo S/PDIF Digital Input (RCA connector).
The “Routing Options” page allows you to select the desired Input type:
By pressing “ENTER” on Input Routing and then rotating the “PM2” or “PM3” encoder, it is possible to
select the Main Inputs for the DS-CP25, allowing the User to choose between Analog or S/PDIF Digital.
The selection can be confirmed by pressing the “ENTER” button.
The following screen shows that the Analog Input has been selected:
Software Version - this page allows you to confirm the Software Version running on the DS-CP25:
SYSTEM UTILITY:
Input Routing
Input Routing
Source: Analog
SYSTEM UTILITY:
Software Version
8
Program Utilities Sub-menu - this sub-menu allows you to access several options related to the DS-CP25
operating mode and to manage the presets stored and recall-able within the Unit:
By pressing the “ENTER” button and then using the “NAV/PM1” encoder the following pages can be
accessed:
Recall a Program - this page allows the Loading of a preset program. You can store up to 20 Presets in
the DS-CP25 memory:
By pressing “ENTER” and rotating the “PM3” encoder, it is possible to scroll through all current available
user presets. If NO USER PRESETS are stored yet, the screen will show the following:
UTILITY MENU:
Program Utilities
PROGRAM UTILITY:
Recall a Program
Recall a Program
No Stored Programs