Galaxy Audio DS-CP25 - Manual (Page 14)

Using the “PM3” encoder to choose a character and the “NAV/PM1” encoder to move between available
locations you can enter a 6 Character Password Name.
The current position of the cursor for the characters to be entered is shown by a “blinking underscore”.
During this editing phase, the display is as follows if we were using “DSCP25” as the password:
If decided not to proceed further, press “ESC” and the “Unit Lock” sub-menu and jump to the following page
screen:
If the password entered in the “Confirm Password” page matches the one entered in the “Enter Password”
page, the following screen will appear:
Enter Password
[DSCP25]
UTILITY MENU:
Security Utilities
Confirm Password
[DSCP25]
13
If the confirmed PASSWORD is the right one, the following screen will show up:
The Password is now configured and held in the device’s memory and the DS-CP25 will go back to the
default screen, adding on the lower row at the extreme right of the LCD the icon of a “LOCK”.
To Unlock the DS-CP25, it is enough to enter again the “Unit Lock” Menu and provide the proper Password.
Note: Originally the DS-CP25 is initialized with a default Password which value is “000000”, value that can
be at anytime, reset with a “Factory Reset” (see “Factory Reset” procedure).
Locking the Unit
[DSCP25]