Galaxy Audio DS-CP25 - Manual (Page 11)

To store the Preset Name, press the “ENTER” button again.
The above action will take you to the “Enter to Save” page showing the selected location for the preset and
the final edited name:
Pressing “ENTER” again, will store the preset in the selected location with the chosen name and the
following transitory screen will appear on the LCD:
Saving to Memory . . . . .
10: Light Comp 3b
[Enter] to Save
10: Light Comp 3b
Save a Program
10: Light Comp 3b
10
Once the preset is stored, the above screen will disappear, returning to the following screen:
Where “Preset 01” is the one running before storing the new one.
To make the new one the current preset, you need to load it with the “Recall a Program” procedure.
If during the Preset Storing process you want to overwrite an existing memory location, select this location
in the “Save a Program” page, then “ENTER” and you will be asked if you want to overwrite this preset
with the following “[ENTER] to Overwrite” screen displaying the currently stored preset and location:
If you wish to proceed, press “ENTER” again and the DS-CP25 will go ahead with the “Edit Name Preset”
page and the subsequent overwrite on completion of the previously described storing process.
Note: At any time it is possible to quit the storing action by pressing the “ESC” button.
Delete a Program - this page allows you to delete a preset already stored in the DS-CP25 Memory:
PROGRAM UTILITY:
Delete a Program
[Enter] to Overwrite
10: Light Comp 3b
Multi-Band Compressor
Preset 01