Galaxy Audio DS-CP22 - Manual (Page 23)

RMS Compressor - the RMS compressor parameters can be controlled by entering the editing
screens and scrolling the parameters with the NAVIGATION encoder and setting them with the
PARAMETER encoder:
Threshold - from this page it is possible to set the Threshold parameters of the RMS Compressor.
Once within the page, the RMS Compressor’s Threshold can be set by the PARAMETER encoder:
The selectable range of the RMS Compressor’s Threshold is from 0dBu (OFF) to -24dBu in steps of
0.1dBu.
Ratio - from this page it is possible to set the Ratio parameters of the RMS Compressor.
Once within the page, the RMS Compressor’s Threshold can be set by the PARAMETER encoder:
The selectable range of the RMS Compressor’s Ratio is from 1:1 (Off) up to 32:1 (Lim) in steps of 1.
H/S Knee - from this page it is possible to set the “Knee” type of the RMS Compressor.
Once within the page, the RMS Compressor’s Threshold can be set by the PARAMETER encoder:
The selectable range of the RMS Compressor’s Knee type is from 0% (Hard) up to 100% (Soft) by
Steps of 1%
Ch.A RMS Compr.
< Threshold = -10dB >
Ch.A RMS Compr.
< Ratio = 32:1 >
Ch.A RMS Compr.
< H/S Knee = 48% >
22