Galaxy Audio DS-CP22 - Manual (Page 13)

When storing an edited configuration for the DS-CP22, select the location for a preset from the 16
available by using the “PARAMETER” encoder.
Once the desired location appears on the screen press ENTER again to reach the “Edit Name
Preset” page.
If the location number 30 is ok, in example, then the screen will be the following:
In this page, the User can enter a Preset Name (up to 16 Characters) by using the “PARAMETER”
Encoder to choose a character and the “NAVIGATION” encoder to move between the 16 available
Locations for the character’s positioning.
The current position of the cursor is shown by a “blinking underscore”.
To store the Preset Name press the “ENTER” button again.
The above action will take you to the “Enter to Save” page showing the selected location for the
preset and the final edited name, for example LightCmp:
Pressing “ENTER” again, you will store the preset in the selected location with the chosen name
and the following transitory screen will appear on the LCD:
Once the preset is saved, the DS-CP22 will go back to the previous level.
Edit Name Preset
30: _preset name
[Enter] to Save
30: LightCmp
Wait : Saving . . . . . .
30: LightCmp
Preset 30: LightCmp
Save Preset
12