Effect picker, Effect preset picker, Tools menu – FXpansion BFD Eco User Manual
Page 18
18
Mix
The
Mix control, which blends between the processed (wet) and unprocessed (dry) signals, exists on all BFD Eco FX. By default, all FX are set
to 100% wet, but this control allows you to adjust the wet/dry mix as required.
While it is not common to see a wet/dry mix control on compressors, it is available on all BFD Eco FX including its dynamics processors. It can
be very useful for parallel compression on a single channel.
Effect preset picker
Effect picker
Select the desired FX device for the slot using this drop-down menu.
Effect preset picker
Each FX device features its own set of presets, selectable from this drop-down menu. You can
cycle through the available presets using the
Previous / Next buttons.
Tools menu
The Tools menu is displayed by clicking the
Tools button, or by right-clicking anywhere in the
common controls area of the EQ and FX slots. This menu offers a number of functions for
managing FX and their settings.
Cut / Copy / Paste Effect
These functions allow you to cut, copy and paste FX devices (with their current settings) between
any FX slots on any channel.
Reset Effect
Reverts to the FX device’s default settings.
Clear Effect
Removes the FX device from the slot.
Load Preset
Opens an OS file Open dialog that allows you to navigate to and select an effect preset file (the file extension is
.bfdfx).
The default folder is
Save Preset
Opens an OS file Save As dialog that allows you to save a preset to any location.
The default folder is
It is strongly recommended to store presets in the default folders, for ease of reloading in the future!