Philips VR237 - Manual (Page 40)

Playback via the aerial cable
nr cCI>
If your TV set does not have an AV-Euro socket, the
aerial cable which is already connected will act as the
connection between your TV set and the video recorder.
O
Switch your TV set on and select the programme
number that you have earmarked for video playback.
(You will find instructions for this in the operating
manual for your TV set).
O
Disconnect the aerial cable from the aerial socket
LIIC-I of the video recorder so that only the cable
connection between the TV set and the video
recorder remains.
O
Make sure the video recorder is switched off and
that there is no cassette in the cassette slot. Press
thfi[~KASSETTE land I WIEDERGABEN Ihiittnns
simultaneously. The display language you have
selected will appear in the display, e.g.: 'ENGLISH'.
O
Press the C q EIIbutton. The video recorder will now
transmit a test picture which should be received by
the TV set. 'TESTPICTURE' will appear in the display.
O Tune in the TV set in the UHF wave band until this
test picture appears. The video recorder is tuned to
UHF channel 36 in our factory.
In order to find out how to tune to the right channel and
to store this on your TV set, please consult the
operating manual for your TV set.
Note:
* Check the sound and picture quality of reception
on your TV set next time you play back from the
video recorder. If necessary you can improve the
picture, colour and sound by adjusting the channel
on your TV set.
38