Channel name display, View mode – Philips VR237 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Channel name display

When you are watching or recording from TV channels

that transmit the VPS signal, you can display the name

of the TV channel (e.g.: 'BBCT) on the TV screen.

Press the CZvreZl button.

Note:

* You can use this function in the Pause, Stop,

Record, Programme Preset and Tuner modes.

View Mode

When you connect another appliance to the I

ext

socket you will be able to use the following additional

functions. The appliance can be a second video

recorder, a decoder, a satellite receiver or a CD video

player.

• Thus, if the second appliance transmits a control

signal, for example, during playback, the (switched

on) video recorder will recognize it and

automatically switch to 'View Mode'.

You can switch View Mode on and off with the

MONITOR~1hiittnn

•

Even when the video recorder is switched off, the

AV-Euro connection from the TV set to the second

appliance is still operational.

Note:

If you have selected the programme number 'E 1 '

or 'E 2 ', the video recorder cannot switch over to

View Mode. This also applies to programme

numbers for which the decoder function has been

activated.

* The function reacts only if your TV set also has

this switch-over function and you are using an

AV-Euro cable to connect your video recorder to the

TV set.