Erase protection – Philips VR237 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Some general notes:

* Programme numbers 'E 1 ' and 'E 2 ' are provided

for recording from external sources (via the 'EXT 1

or 2' AV-Euro socket).

* Have you started to record one TV programme

and now want to switch to another TV channel to

record a different TV programme? To do this, you

have to interrupt the current recording by pressing

the LPAUjS.E./jsTOiLi.LMJ button. Now select the new

programme number and start this recording by

pressing th^l

aufnahme

I button.

* If you have forgotten to load a cassette, the

warning 'NO CASSETTE' will appear in the display.

* If you accidentally load a cassette with erase

protection and try to record on it, the warning

'PROTECTED CASS' will appear in the display.

After a few seconds the cassette will be

automatically ejected.

* If the end of the cassette is reached during

recording, the cassette will be automatically

ejected. The video recorder will then switch itself

off after a few minutes.

* When you make a new recording on a video

cassette, it will automatically record over and delete

any recordings already on the cassette.

Erase protection

So that you don't accidentally delete an important

recording, you can remove the special tab (erase

protection) on the narrow side of the cassette with a

screwdriver.

Later, if you no longer want the cassette to be erase

protected, you can seal the gap again with adhesive

tape.