Philips VR237 - Manual (Page 33)

Some general programming notes:
* The TIMER record function will only work when
the video recorder is switched off. if the video
recorder is switched on before a programmed
recording is due to take place, the warning TIMER
RECORD' will light up on the display.
* If the end of the cassette is reached during a
programmed recording, the video recorder
automatically ejects the cassette.
* If you forget to load a cassette after programming,
'NO CASSETTE' will appear in the video recorder
display.
* If you insert a cassette with erase protection for
the recording, 'PROTECTED CASS' will appear in
the video recorder display for a few seconds.
The cassette will then be ejected.
* If you have programmed all TIMER blocks,
'MEMORY FULL' will appear in the video recorder
display.
Ch
31