Philips VR6293 - Manual (Page 9)

REMOTE CONTROL
4
You can operate most of the functions of the video recorder
using the remote control unit.
Inserting the batteries
• Open the cover on the back of the remote control.
• Insert the batteries as indicated in the battery holder.
If you want to control video recorder functions:
• Set (TVA/CR) to position ‘VCR’.
• Aim the remote control at the video recorder and press the
required button.
If you want to control TV functions:
• Set (TVA/CR) to the position ‘TV’.
• Aim the remote control at the TV and press the required TV
function button (e.g. digit buttons (0-9) to select TV stations).
To select numbers:
Using + or - you can change:
- preselection numbers
- channel numbers
- a time indication.
However, instead of using + or you can aiso use the digit
buttons (0-9) on the remote control.
For numbers 0-9:
• Press the required digit button.
For numbers 10-99:
• Press (-/-) until the Display on the video recorder shows
Press the required digit buttons.
For number 100-120 (only for channel numbers):
• Press (-/-) until the Display of the video recorder shows ‘—’.
• Press the required digit buttons.
To return to single digit entry press (-/-) again until the Display
shows
STORING TV STATIONS
5
— If you know the channel numbers of the TV stations you want
to store: see the section ‘Direct channel storage’.
— If you do not know the channel numbers of the TV stations
you want to store: see the section ‘Channel search and storage’.
You can store up to 48 preferred TV stations.
Direct channel storage
0 Switch on the TV.
(0 On the TV select the preselection (program) number for the
video recorder.
(3) Switch on the video recorder usingIc!) .
• If necessary, press C/P until the Display shows ‘P’ and a
preselection number.
@ Select the desired preselection number using + or - or the
digit buttons (0-9) on the remote control.
To change the number slowly, press + or - repeatedly.
To change the number quickly, press and hold + or -.
Select the same preselection numbers for the TV stations on the
video recorder as those on your TV.
(5) Press STORE.
The Display shows a flashing channel number for the TV station
which is being received and the preselection number.
I. I I M II
_i ' ui ' (_ P I
l_ !_ I
Select the desired channel number using + or - or the digit
buttons (0-9) on the remote control.
0 Press STORE again to store the TV channel on the
preselection number.
• Repeat steps (?) to 0 for ali preferred channels.
Channel search and storage
0 Switch on the TV.
0 On the TV select the preselection (program) number for the
video recorder.
0 Switch on the video recorder using I(!) and select
preselection (program) number 1 using + or - or the digit
buttons (0-9) on the remote control.
(GB) 5