Extras – Philips VR6293 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Display of the video recorder shows:
"TIMER", and and a number of the selected block if the
n m n
transmission is accepted.
"ERROR" if an error occurred during the transmission, or
the transmitted data are not correct (e.g. start
time equal to stop time).
Checking or changing TIMER block details
0 Press® (®<-) or (®RC)
once.
(2) Press + or - until the Display shows the required TIMER
block to be checked or changed.
(
3
) Press® (®^) or (®RC ) again.
The Display shows the start time of the recording.
(4) If you press® (®^) or (® RC )repeatedly, the
Display shows the stop time, date and program number.
You can change the details as they appear pressing + or -.
(
5
) Press®
( 9 ^ )
or (®RC) once more.
If you have used (® RC) on the remote control:
•
Press (IKO ) to transmit the data to the video recorder.
Cancelling a TIMER block
You can cancel a TIMER block of a recording already in
progress, or of a recording which has not yet started:
0 Press® (®C-) or (®RC).
0 If necessary, press + or - to select the TIMER block to be
cancelled.
0 Press X.
If you have used (® RC) on the remote control:
•
Press (({(O ) to transmit the data to the video recorder.
One Touch Recording (OTR)
Use OTR to record immediately for 30, 60 minutes, etc.
0
Load a cassette.
0 Press + or - to select the TV station you want to record
from.
0
Press the two buttons (A and OTR) on the remote
control simultaneously to start the recording.
The Display shows, for example:
__
L J L_ 1
1 ^ t-
P
0
OTR
n n . 1 ¡ i ~
E¡a
•
I_ l_ •
1^1
The time shown is the time the recording will stop.
(4) Each time you press the two buttons (A and OTR)
simultaneously, the recording time is extended by 30 minutes.
If you go too far, press X to return to the current time +30
minutes.
Note:
If you want to stop the OTR, press ■ or ICi).
Sleep function
One Touch Recording is also useful if you want the video
recorder to finish a recording automatically, for instance when
you are going to bed.
In this case press the two buttons (A and OTR) as many
times as required to continue and finish the recording.
EXTRAS
11
If you want to Improve picture quality and your TV has a 21 -pin
connector
• Connect the corresponding 21 -pin sockets on the TV and the
video recorder using a special cable.
Consult your dealer for the correct cable.
(
gb
) 17