Manual programming, Tuning to preset radio stations – Philips FW560C User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual programming
1 Press TUNER
2 Press TUNER (BAND) to select the desired
waveband; FM or AM.
3 Press PROGRAM for less than one second.
PROGRAM flag, the frequency and preset station
number start flashing.
— The next available preset number will be displayed
for selection.
4 Press TUNING or ►► to tune to the desired
frequency.
• When all 40 presets are stored, no preset number is
shown.
— The message VROGRnn TULL" will be
displayed.
• If you wish to store the radio station to another preset
number, press
PRESET T or A to select the desired
preset number.
5 Press PROGRAM again.
-* PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
Notes:
- You can cancel the manual programming by pressing
STOP m.
- During programming, If no button is pressed within 20
seconds, the system will exit program mode
automatically.
Tuning to Preset Radio Stations________
• Press
PRESET T or A to select the desired preset
number.
The preset number, frequency and waveband
appear on the display.
20