Roland DSD-2 - Manual (Page 2)

NOTICE CAUTIONS
»Please be sure to use the AC Adaptor BOSS PSA-120, 220 or 240 depending on the voltage
system in your country. ACA-series can not be used, as the DSD-2 draws more current (45-
60mA 9V DC) than usual compact effect units.
»The battery (one Dry Battery. 9V) will last for 30 minutes to 2 hours (manganese) or 5 to 10
hours (alkaline), depending on the conditions. The use of a BOSS PSA-Adaptor and alkaline
battery is recommended for a longer time performance.
»Avoid using this unit in extreme heat or humidity, or where it may be affected by dust.
»When the unit is not in use for a long
period, remove the battery to prevent pro­
blems caused by the battery leakage.
»if the battery voltage drops, effect becomes
vague or no sound is produced. To prevent
that, replace the battery.
»Be sure to keep the battery securely con­
nected even while using the AC Adaptor,
then the unit will continue to operate even
if the AC Adaptor cord comes out during
performance.
»To avoid wasting the battery unplug the
cord from the OUTPUT jack when the unit
is not in use.
AC ADAPTOR (OPTION)
> For AC operation, be sure to use the BOSS
AC Adaptor PSA-120, 220 or 240 depending
on the voltage system in your country, and
never use one Adaptor for two units simul­
taneously.
CONNECTING
( Be sure to take off connecting plug from the Output when the unit is not used. ^
AMPLIFIER
i
TO AC Adaptor Jack
AC ADAPTOR
BOSS PSA-series
Power is switched on
when a plug is put
into Output Jack. (In
battery operation)
ÔôôitS
^output «#014-
Olgitol Somplar
/0«tog oso -2
r:r=PF!=
DSD-2
ELECTRIC GUITAR
BASS GUITAR
•The microphone can be directly connected to the Input Jack
only when it has sufficient output.
Rhythm Machine with
Trigger Output
(e.g. BOSS DR-110)
MICROPHONE
Preamplifier, Mixer
(e.g. BOSS BX-400)