Futaba 9VAP - Manual (Page 34)

ADJUSTMENTS AND FLIGHT TECHNIQUES
WING TYPE
The WING TYPE program includes four built-in
mixing circuits.
1. Aileron Differential
2. Flapperons
3. Elevon
4. V-Tail
Servo directions and throws are fully-program-
mable.
Setting Method
Displaying the WING TYPE screen:
1) Select the EDIT screen and move the cursor
to Line 2 with the cursor key, then press
the MIX program key.
2) Press the program key.
NOTE: WING TYPE mixing is not available in
the BASIC mixing mode.
(Aileron Differential)
A differential between up and down movement of each aileron can be programmed. This is
very helpful in correcting roll axis deviations. A separate servo must be used on each aileron.
CH1 is used to control one aileron, and CH7 the opposing aileron.
1) Display the WING TYPE screen and press the
program key.
2) To activate mixing, press the program
key and to deactivate the function, press the
key.
to be set using the cursor keys.
In the display example, the cursor was moved
to the AIL (CH1) R/U position.
(R/U represents the aileron right stick deflec-
tion and L/D represents the left stick deflec-
tion.)