Futaba 7FGH - Manual (Page 4)

• CONTENTS AND RATINGS
Ratings and specifications are subject to change without prior notice
Model
Transmitter
Receiver
Servo
Switch
Ni-cd battery
Accessories
FP-7FGH
FP-T7FGH x 1
FP-R107M x 1
FP-S130x4
SWH-5 (R4-SWJ)
NR-4Jx 1
Charger, extension cord, frequency flag, spare horn, neck strap, mount-
ing screws
Transmitter FP-T7FGH Servo FP-S130
Operating system
Transmitting frequency
Modulation
Power requirement
Current drain
: Two-stick, 7 channels for
F3C helicopter
: 72MHz band
27, 29, 35, 40, 72 & 53
MHz band switching pos-
sible by changing RF
module.
: FM
: 9.6V, 8/500mAH inter-
nal ni-cd battery.
: 150mA
Control system
Operating angle
Power requirement
Current drain
Output torque
Operating speed
Dimensions
Weight
+ pulse width control
1520uS.N
One side 45° or more (in-
cluding trim)
4.8V (shared with
receiver)
6.0V/8mA (at idle)
55.6 oz .in (4 kg-cm)
0.24 sec/60°
1.52x0.77x 1.36in.
(38.5x 19.5 x 34.5mm)
1.48 oz (42g»
2
Receiver FP-R107M Charger FBC-2 (A)
Receiving frequency
Crystal change system
Intermediate frequency
Power supply
Current drain
Dimensions
Weight
Receiving range
27,29, 35, 40, 72 & 53MHz.
Precision crystal that permits
frequency change within the
same band.
455kHz
4.8V
Ni-Cad battery, shared with re-
ceiver
15mA
1.69 x2.72x0.79in.
(43 x 69 x 20mm)
1.9oz (54g»
500m on the ground, 1000m or
greater in the air when used
with the FP-T7FGH.
Input voltage
Output
120VAC,50/60Hz.
4VA
Txside9.6V.45mA
Rx side 4.8V, 45mA
Receiver and servo Ni-Cad battery NR-4J
Voltage
Dimensions
Weight
4.8V,4/500mAH
2.01 x 2.28 x 0.59in.
(51 x 5 8 x 15mm)
3.35oz (95g)